Chapter 6 Device Control and Upgrading Viewing and Clearing Device Diagnostics
PM130 PLUS Powermeter Series_Installation Operation and Manual 122
6.3 Viewing and Clearing Device Diagnostics
Using the Front Display
See Diagnostics Display in Chapter 3 on how to view and clear device diagnostics from the front display.
Using PAS
Ensure that the On-line button on the PAS toolbar is checked, select Device Control from the Monitor
menu, and then click on the Device Diagnostics tab.
See Device Diagnostic Codes in Appendix G for the list of diagnostic codes and their meaning.
Figure 6-4: Device Control Dialog Box – Device Diagnostics Tab
To clear the device diagnostics events, click on Clear.
To Next Page
Loading...
