Chapter 6 Device Control and Upgrading Viewing Communication Status and Statistics
PM130 PLUS Powermeter Series_Installation Operation and Manual 123
6.4 Viewing Communication Status and Statistics
Ensure that the On-line button on the PAS toolbar is checked, select Device Control from the Monitor
menu, and then click on the Communications tab.
Figure 6-5: Device Control Dialog Box – Communications Tab
This window indicates the present GPRS communication status (see Setting Up GPRS Network in Chapter
5) and connection statistics of the TCP clients (see Setting Up eXpertPower Client and Setting Up TCP
Notification Client in Chapter 5).
To clear the communication counters, click on Clear.
You can also clear the communications counters via the PAS Reset dialog (see Resetting Accumulators,
Maximum Values and Files).
To Next Page
Loading...
