Chapter 7 Monitoring Meters Viewing Real-time Harmonic Spectrum
PM130 PLUS Powermeter Series_Installation Operation and Manual 134
7.4.2 Viewing a Spectrum Table
Click on the button on the local toolbar to display the harmonics spectrum in a tabular view for a
selected phase or for all phases together.
The spectrum table shows voltage, current, active power and reactive power harmonic components both
in percent of the fundamental and in natural units, and harmonic phase angles.
To change a phase, click on the window with the right mouse button, select Options..., check the phase
you want displayed, and then click OK.
To Next Page
Loading...
