Chapter 7 Monitoring Meters Viewing Real-time Harmonic Spectrum
PM130 PLUS Powermeter Series_Installation Operation and Manual 135
7.4.3 Viewing Synthesized Waveforms
To view the synthesize waveforms based on the sampled harmonic spectrum, click on the button on
the local toolbar to view non-overlapped voltage and current waveforms, or click on the button to view
them overlapped.
PAS shows a pair of 4-cycle voltage and current synthesized AC waveforms for a single phase.
To select the channels you want to view, click with the right mouse button on the waveform window, select
“Channels...”, check the channels for the phase you want displayed, and then click OK.
To Next Page
Loading...
