Chapter 8 Retrieving and Storing Files Using the Upload Scheduler
PM130 PLUS Powermeter Series_Installation Operation and Manual 137
8.2 Using the Upload Scheduler
To setup the Upload Scheduler:
1. Select Upload Scheduler from the Logs menu.
Figure 8-1: Upload Scheduler Setup Dialog Box
2. Click Add Site, point to the site database for which you want to organize the schedule, and then
click OK.
3. Click Browse and select a database for storing retrieved data, or type the name for a new
database, select a directory where you want to save it, and then click OK.
4. Click Configure or double click on the site row.
5. Select a daily, weekly or monthly schedule, and adjust the start time. If you wish to upload data
periodically in predefined intervals, click on Periodic and define the time period in hours and
minutes.
6. Select the number of attempts to upload data in the event of temporary communication problems
or unavailability of your device, and the delay between attempts in minutes and seconds.
To Next Page
Loading...
