Satec PM130 PLUS Series - Page 14

Chapter 1 General Information Features
PM130 PLUS Powermeter Series_Installation Operation and Manual 14
Display
• Easy to read 3-row (2x4 characters + 1x5 characters) bright LED display, adjustable update time
and brightness
• Auto-scroll option with adjustable page exposition time; auto-return to a default page
• LED bar graph showing percent load with respect to user-definable nominal load current
Real-time Clock
• Internal clock with 20-second retention time
• Optional battery-operated clock unit (see Available Options)
Communications
• Standard 2-wire RS-485 communication port; Modbus RTU, DNP3, SATEC ASCII
communication protocols and IEC 61870-5-101
• Optional second communication port (see Available Options); Modbus RTU, Modbus/TCP,
DNP3, DNP3/TCP, IEC 61870-5-101/104, SATEC ASCII and Profibus DP communication
protocols
• eXpertPower client for communicating with the SATEC proprietary eXpertPower Internet
services (with the Ethernet or GPRS module), see Setting Up eXpertPower Client)
• TCP notification client for communicating with a remote Modbus/TCP server on events or
periodically on a time basis (with the Ethernet or GPRS module), see Setting Up TCP Notification
Client)
Meter Security
• Password security for protecting meter setups and accumulated data from unauthorized changes
Upgradeable Firmware
• Easy upgrading device firmware through a serial or Ethernet port.
Software Support
• PAS – free meter configuration and data acquisition tool
• eXpertPowerTM – SATEC proprietary Internet services