Chapter 2 Installation Communications Connections
PM130 PLUS Powermeter Series_Installation Operation and Manual 46
2.7.2 ETH module – COM2 Ethernet Connection
Figure 2-33 COM2 Ethernet Connection
• The ETH module TERMINAL is for use only with equipment which has no live parts which are
ACCESSIBLE
• The RATING of the insulation of the external equipment for use with the ETH module, shall
comply according to Installation Category II for insulation to be suitable for SINGLE FAULT
CONDITION
• The external equipment TERMINAL connection type is RJ-45
• The type of equipment that might be connected to the TERMINAL is:
o Personal Computer – PC or LAPTOP
o 10/100Base-T LAN HUB and/or Switch
To Next Page
Loading...
