EasyManua.ls Logo

Satec PM130 PLUS Series - Connecting a GSM;GPRS Modem; Connecting a Wifi Module

Satec PM130 PLUS Series
176 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2 Installation Communications Connections
PM130 PLUS Powermeter Series_Installation Operation and Manual 50
2.7.5 Connecting a GSM/GPRS modem
A GSM/GPRS modem module can be connected to the meter COM2 port to provide communications with
the remote MODBUS/TCP server via a wireless GPRS network.
The GSM/GPRS SIM must not have any incoming voice call. The customer must require from the
Service Provider for DATA services only
The GPRS modem module can be equipped with two different antennas: internal Antenna for
installation into plastic closet or no-metallic environment. For metallic installation use external
antenna
See Setting Up GPRS Network in Chapter 5 for information on configuring GPRS communications in your
meter.
2.7.6 Connecting a WiFi module
A WiFi module can be connected to the meter COM2 port to provide communications with the remote
MODBUS/TCP server via a WiFi
See Setting Up WiFi Network in Chapter 5 for information on configuring GPRS communications in your
meter.

Table of Contents

Related product manuals