Chapter 3 Using Front Display Data Display
PM130 PLUS Powermeter Series_Installation Operation and Manual 57
3.2.6 Min/Max and Maximum Demand Display
1. Press the MAX/MIN button.
The MIN, MAX, or MAX DMD LED is illuminated when in the MIN/MAX display.
2. Use the UP and DOWN arrow buttons to scroll through the Min/Max and Max. Demand pages.
To see the time and date of the event occurrence:
1. Press simultaneously the SELECT and UP buttons.
2. Use the UP and DOWN arrow buttons to scroll through the parameters displayed on the page. A
corresponding LED at the right is illuminated showing the parameter for which the timestamp is
displayed.
The time is displayed in format hh.mm, and the date in format MM-DD-YY (default) or in any other format
you can select via the display setup (see Configuring the Display).
Note that Volts readings are line-to-neutral in 4LN3, 3LN3 and 3BLN3 wiring modes, and line-to-line in
other modes.
Table 5: Min/Max and Maximum Demands (Regular version)
To Next Page
Loading...
