Satec PM130 PLUS Series - Harmonics Display (PM130 EH)

Chapter 3 Using Front Display Data Display
PM130 PLUS Powermeter Series_Installation Operation and Manual 59
3.2.8 Harmonics Display (PM130EH)
1. Press the H/ESC button.
The THD/TDD LED is illuminated.
2. Use the UP and DOWN arrow buttons to scroll through total harmonics measurements.
3. Press the H/ESC button again to move to the individual harmonics.
Note that voltage harmonics readings are line-to-neutral in the 4LN3, 3LN3, 3BLN3 wiring modes, and
line-to-line in all other modes.
Table 8: Total Harmonics
1
thd.
V1/V12 THD
V2/V23 THD
V3/V31 THD
Voltage THD
2
thd.
I1 THD
I2 THD
I3 THD
Current THD
3
tdd.
I1 TDD
I2 TDD
I3 TDD
Current TDD
4
HF
I1 K-Factor
I2 K-Factor
I3 K-Factor
Current K-Factor
Table 9: Individual Voltage Harmonics
1
3.
V1/V12 HD%
V2/V23 HD%
V3/V31 HD%
Order 3 harmonic distortion
2
5.
V1/V12 HD%
V2/V23 HD%
V3/V31 HD%
Order 5 harmonic distortion
…
19
39.
V1/V12 HD%
V2/V23 HD%
V3/V31 HD%
Order 39 harmonic distortion
Table 10: Individual Current Harmonics
1
3.
I1 HD%
I2 HD%
I3 HD%
Order 3 harmonic distortion
2
5.
I1 HD%
I2 HD%
I3 HD%
Order 5 harmonic distortion
…
19
39.
I1 HD%
I2 HD%
I3 HD%
Order 39 harmonic distortion