Satec PM130 PLUS Series - Energy Display (PM130 E;EH)

Chapter 3 Using Front Display Data Display
PM130 PLUS Powermeter Series_Installation Operation and Manual 60
3.2.9 Energy Display (PM130E/EH)
1. Press the ENERGY button.
The kVAh, kvarh, or kWh LED is illuminated.
2. If TOU registers are configured in the meter, you can press the button again to scroll through all
active TOU registers.
3. Use the UP and DOWN arrow buttons to scroll through energy pages.
Per phase energy accumulators are displayed along with total energies if phase energy calculation is
enabled in the Device Options setup.
Table 11: Total and Phase Energies
1
Ac.i
1234
56789
Total kWh import
2
rE.i
1234
56789
Total kvarh import
3
AP.
1234
56789
Total kVAh
4
Ac.E
1234
56789
Total kWh export
5
rE.E
1234
56789
Total kvarh export
6
Ac.i 1
1234
56789
Phase L1 kWh import
7
rE.i 1
1234
56789
Phase L1 kvarh import
8
AP. 1
1234
56789
Phase L1 kVAh
9
Ac.i 2
1234
56789
Phase L2 kWh import
10
rE.i 2
1234
56789
Phase L2 kvarh import
11
AP. 2
1234
56789
Phase L2 kVAh
12
Ac.i 3
1234
56789
Phase L3 kWh import
13
rE.i 3
1234
56789
Phase L3 kvarh import
14
AP. 3
1234
56789
Phase L3 kVAh