Chapter 3 Using Front Display Using the Menus
PM130 PLUS Powermeter Series_Installation Operation and Manual 66
3.4.4 Selecting a Menu Entry
Selecting the OPS or CHG entry moves you to the Main menu that is represented by two entries:
• the upper window displays a list of menu entries
• the bottom item acts as an assisting exit window.
To select a menu entry from the main menu:
1. If the upper item is not highlighted, use the SELECT button to activate it.
Figure 3-5: Main Menu
2. Scroll through the menu list by pressing briefly the UP or DOWN arrow buttons until the required
menu entry appears.
3. Press the ENTER button.
To Next Page
Loading...
