Unit 4: Standard Command Codes
E/Pro Programming Reference
4-51 PN: 9001096E
NOTES
1. To add human readable at the specified character type.
2. Data not within the specified value will not be printed out. When barcode ratio is small,
and HRI font type size is large, the Human Readable characters may overlap one another.
3. Human readable will be performed further at the appropriate location of printer.
4. Human Readable data will be printed only when a valid Thin Bar Width is selected within
the barcode command and it complies to the following table.
5. A user can automatically print HRI without the d.
BARCODE, HUMAN READABLE INFORMATION
Printer
DPI Valid Thin Bar Value (bb)
203 02, 03
305 03, 04
609 06, 07, 08
To Next Page
Loading...
