SATO CL408 - CENTRONICS PARALLEL INTERFACE; ELECTRICAL SPECIFICATIONS; DATA STREAMS; Centronics Parallel Interface Pin Assignments

Unit 4: Standard Command Codes
E/Pro Programming Reference
4-52 PN: 9001096E
CODE 93
FUNCTION
Specifies CODE93 barcode.
FORMAT
<ESC>BCaabbbccn~n
a = Narrow bar width (01 to 12 dots)
b = Barcode Height (001 to 999 dots)
c=
Data Digit Number (01 to 99)
n=
Print Data (barcode data)
Place anywhere after <ESC>V but before <ESC>Q.
EXAMPLE
<ESC>H0100<ESC>V0125<ESC>BC03100081234ABCD
<ESC>H0155<ESC>V0240<ESC>XS1234ABCD
OUTPUT
(4-33)
NOTES
The quantity of digit data and input data must be equal. A command error will occur if the digit data and
input data are not equal.
Refer to Appendix: Reference Table 14 for additional information.