Unit 4: Standard Command Codes
E/Pro Programming Reference
4-56 PN: 9001096E
OUTPUT
Without incrementing:
(4-36a)
With incrementing:
(4-36b)
NOTES
UCC128 code is exclusive to Standard Carton ID. When printing in EAN128, designed for the markets
in the medical, fresh food, or flowers and plants, use CODE128 Barcode <ESC>BG to specify print
data with application identification or separator that matches each specification.
Start character code, function character, end character code, and identification code (corresponds only
to “00”) are added automatically.
Modulus 10 check character and modulus 103 check character are automatically generated.
Sequential number of barcode data is available.
Line pitch between barcode and expository font is fixed at 10 dots.
If the width of expository font is wider than that of the barcode, it starts printing from the print start
position of barcode.
If the width of expository font is narrower than that of the barcode, expository font will be aligned to the
center of barcode for printing.
Prints expository font in OCR-B.
If the expository font is outside of the print area, it will not be printed. When HRI is available, specify
Vertical Print Position (<ESC>V) and Horizontal Print Position (<ESC>H) in consideration of print of
expository font.
Refer to Appendix: Reference Table 17 for additional information.
SSCC/UCC128
To Next Page
Loading...
