Unit 4: Standard Command Codes
E/Pro Programming Reference
4-75 PN: 9001096E
2D20 (MAXI CODE)
FUNCTION
Specifies Maxi Code of 2D code.
FORMAT
<ESC>2D20,a(,bbb,ccc,d...d) <ESC>DNmmmm,n...n
a=Mode
2: Delivery only (numeric)
3: Delivery only (alphanumeric)
4: Standard symbol
6: Reader only
b = Service class (001 to 999 numeric)
c = Country code (001 to 999 numeric)
d = Postal code
Mode 2 (0 to 999999999, numeric only)
Mode 3 (000000 to 999999, alpha-numeric with capital letters)
m = Data size (1 to 138 bytes)
n=Print data
Between <ESC>A and <ESC>Z but following <ESC>H and <ESC>V.
EXAMPLE
Example - Mode: Delivery only (numeric), Service class: 003, Country code: 081, Postal
code: 123456789.
<ESC>2
<ESC>V100<ESC>H100
<ESC>2D20,2,003,081,123456789
<ESC>DN0010,0123456789
<ESC>Q2
<ESC>Z
OUTPUT
(4-48)
NOTES
Enter parameters for b, c, and d when selecting modes 2 or 3, omit them when selecting modes 4 or 6.
Modes 2 & 3: 123 maximum numeric print data, 84 alphanumeric.
Modes 4 & 6: 138 maximum numeric print data, 93 alphanumeric.
The size of Maxi code printed will not be affected by data quantity.
When designating a parameter other than specified or when the print data size does not match, printing
will not be performed.
When selecting modes 4 or 6, set data size (m) to 12 to allow the Maxi Code to be read by scanner.
Refer to Appendix: Reference Table 32 for additional information.
To Next Page
Loading...
