Unit 4: Standard Command Codes
E/Pro Programming Reference
4-132 PN: 9001096E
SUBNET MASK
FUNCTION
Specifies Subnet mask.
FORMAT
<ESC>W2a~a
a~a = Subnet mask = 12 digits fixed
Place this command between <ESC>A start code and <ESC>Z stop code.
EXAMPLE
<ESC>A
<ESC>W2255255255000
<ESC>Z
OUTPUT
This command does not result in printer output.
Setting can be printed on the factory test print.
NOTES
You cannot use this command in combination with other commands.
The set parameter will become valid after rebooting.
Default setting of Subnet mask is as follows:
Default gateway: 000000000000
To Next Page
Loading...
