SATO CL408 - Memory Card Commands

Unit 5: Optional Command Codes
E/Pro Programming Reference
5-5 PN: 9001096E
MEMORY CARD COMMANDS
CARD SLOT FOR USE
FUNCTION
Specifies the card slot for use.
FORMAT
<ESC>CCa
a = 0: Internal (1 fixed)
1: Memory Area 1
2: Memory Area 2
Place immediately following <ESC>A.
EXAMPLE
<ESC>A
<ESC>CC1
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
Specify this command for memory card function. When the card is not inserted, a card error will occur.