Unit 5: Optional Command Codes
E/Pro Programming Reference
5-13 PN: 9001096E
FORMAT/FIELD, STORE
FUNCTION
To store a format field description in the memory card.
FORMAT
<ESC>YS,aa<ESC>/N,bb,cc....c
aa = Format number to be stored(01 to 99)
bb = Field number to be stored (01 to 99)
cc...c = Field length to be stored (01 to 99)
Place immediately following the <ESC>CC Memory Area Select command.
EXAMPLE
<ESC>A
<ESC>CC1
<ESC>YS,02<ESC>/N,01,13<ESC>V0100<ESC>H0100<ESC>XB1
<ESC>/N,02,13<ESC>V0200<ESC>H0200<ESC>XB1
<ESC>Z
OUTPUT
There is no printer output as a result of this command. See <ESC>YR Format/Field Recall command.
NOTES
This command requires the Expanded Memory option.
When storing multiple formats, enter <ESC>A and <ESC>Z with one format.
Specify the Card Slot fo Use <ESC>CC prior to using this command.
Use Field Store <ESC>/N in conjunction with this command.
Attempts to store using a predefined field number will result in an error and the targeted content will be
printed.
Refer to Appendix: Reference Table 52 for additional information.
To Next Page
Loading...
