SATO CL408 - Page 207

Unit 5: Optional Command Codes
E/Pro Programming Reference
5-15 PN: 9001096E
FORM OVERLAY, STORE
FUNCTION
To store fixed print contents to the memory card.
FORMAT
<ESC>&S,aa,bbbb,cccc
aa = Store number (01 to 99)
bbbb = Horizontal size of window (50 to H max)
cccc = Vertical size of window (50 to V max)
Place immediately following the <ESC>CC Memory Area Select command.
EXAMPLE
<ESC>A
<ESC>CC1
<ESC>&S,01
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
The Memory Area Select (<ESC>CC) command must be sent prior to this command.
The label image must be divided from other label images by the <ESC>A and <ESC>Z bounding
commands.
The parameters of “bbbb” and “cccc” may be omitted. By specifying them, the label image can be
moved by using the <ESC>V and <ESC>H position commands when recalling the label image. If the
repositioned label image exceeds beyond the printable area, the image wil be truncated. If an
<ESC>A1 Media Size command has been sent to the printer, the maximum size that can be stored is
the size of the label defined in the command.
A label image cannot be stored in a location that already contains data. Graphics, PCX and BMP files
can be stored but their combined size cannot exceed memory.
The forms stored by this command are cleared by the <ESC>*R command.
Refer to Appendix: Table 53 for additional information.