SATO CL408 - Font Configuration (Fg); Interface Status (Ig)

Unit 6: Bi-Directional Communications
E/Pro Programming Reference
6-8 PN: 9001096E
FORM OVERLAY STATUS (FO)
Receipt of SOH followed by FO causes the printer to return information bounded by an STX-ETX pair that reports
the forms downloaded into the printer.
FONT CONFIGURATION (FG)
Receipt of SOH followed by FG causes the printer to return information bounded by an STX-ETX pair that reports
information on the stored font or graphic.
INTERFACE STATUS (IG)
Receipt of SOH followed by IG causes the printer to return information bounded by an STX-ETX pair that reports
the type of interface connection currently set.
PARAMETERS
BYTE VALUE DESCRIPTION
1-2 01 to 99 Form Registration Number
3-18 ASCII Form Name
PARAMETERS
BYTE VALUE DESCRIPTION BYTE VALUE DESCRIPTION
1-2 ASCII Font ID Number 76 HEX Family Attribute
3-4 00H 01H Font Graphic 77 HEX Character set
5-36 ASCII Font Name 78 HEX Italic Attribute
37-48 ASCII Font Style
79-80 HEX Weight Attribute
49-52 ASCII Font Point Size 81-82 HEX Spread
53-54 HEX Character Width (dots) 83-84 HEX Assent in Dots
54-60 HEX Character Height (dots)
85-86 HEX Registration Start Code
57-60 HEX Font size 86-87 HEX Registration End Code
58-64 HEX Font Registration Number
88-95 HEX Reserved
65-68 HEX Font Data Top Address 96-98 HEX Code
69-72 HEX Total size 99-100 HEX Horizontal Valid size
73-74 HEX Vertical/Horizontal Writing Flag
101-102 HEX Left Gap Size
75 HEX Character Pitch (fixed/variable)
PARAMETERS
1
Interface Type 0: IEEE1284 Parallel
1: RS232 Serial
2: Local Area Network (LAN)
3: Universal Serial Bus (USB)