Unit 3: Code Quick Reference
E/Pro Programming Reference
3-12 PN: 9001096E
Faaaabcccc ddee Sequential Numbering. Allows the printing of sequencing fields (text, bar codes) where all
incrementing is done within the printer.
aaaa = Number of times to repeat the same data (0001 to 9999)
b = Plus or minus symbol (+ for increments; - for decrements)
cccc = Value of step for sequence (001 to 9999)
dd = Quantity of digits for sequential numbering (01 to 99)
ee = Quantity of digits free for sequential numbering (01 to 99)
FCaaabbbcd Print circles. Specifies the printing of circles.
a
=
Radius (5 to 999 dots)
b
=
Line width (1 to 999 dots)
c
=
Section number (0 to 8: Omissible)
d
=
Pattern (0 to 3: Omissible)
0: Solid black line
1: Gray 1
2: Gray 2
3: Gray 3
FTaaaabbbbccccd Print triangles. Specifies the printing of triangles.
a
=
Side length (10 to 2000 dots)
b
=
Line width (1 to 1000 dots)
c
=
Base length (10 to 2000 dots) Omissible.
d
=
Pattern (0 to 3) Omissible.
0: Solid black line
1: Gray 1
2: Gray 2
3: Gray 3
FMa Format memory card. Specifies the format (initialization) of memory card.
a = User ID: Up to 8 bytes in alphanumeric and symbols.
FP Print memory card status. Prints the status of memory card.
COMMAND QUICK REFERENCE
INSTRUCTION DESCRIPTION
To Next Page
Loading...
