Unit 3: Code Quick Reference
E/Pro Programming Reference
3-14 PN: 9001096E
GRccc Graphic, Recall. Recalls for printing the graphic image stored by the GI command.
ccc = Storage number (001 to 999)
GTaaa,bbbbb, nn. . . n BMP File, Store. Stores BMP files in Expanded Memory.
aaa = Storage area number (001 to 999)
bbbbb = Size of BMP file in bytes
nn....n = Data
Haaaa Horizontal Position. Specifies a field’s horizontal location across the width of the label from
the current base reference point. The units of measurement are dots.
I Batch Separator. To issue a tag with a special marking so that it can easily be divided on the
stacker. Is applicable only to the XL400/410e printers.
a
= Batch separator type
1: Divided mark method
2: Separator method
I2abcde Serial interface. Specifies serial interface.
a Baud rate = 0: 9600 BPS
= 1: 19200 BPS
= 2: 38400 BPS
= 3: 57600 BPS
b Data bit = 0: 8 bit
= 1: 7 bit
c Parity =
0 = No parity
1 = Odd
2 = Even
d Stop bit =
0 = 1bit
1 = 2bit
e Control =
0 = READY/BUSY control (Single item buffer)
1 = READY/BUSY control (Multi item buffer)
2 = XON/XOFF
3 = Driver protocol
4 = Status 3
I3a LAN Interface. Specifies LAN interface.
a = 0: 2 port connection, or unsolicited (for driver protocol)
= 1: 2 port connection or solicited by ENQ (for driver protocol)
= 2: 1 port connection or solicited by ENQ (STATUS3)
IDaa Job ID Store. Stores the Job ID number.
aa = Job ID number assigned (01 to 99)
COMMAND QUICK REFERENCE
INSTRUCTION DESCRIPTION
To Next Page
Loading...
