SATO CL408 - Character, Fixed Spacing; Command Structure; Special Notes

Unit 3: Code Quick Reference
E/Pro Programming Reference
3-22 PN: 9001096E
2D32 2D Code. Specifies QR Code (Micro QR Code) of 2D code.
a
= Error correction level
L: 7%
M: 15%
Q: 25%
b
= Cell size (01 to 32 dots)
c
= Data setting mode
0: Manual
1: Automatic
k
= Character mode
1: Numeric mode
2: Alphanumeric mode
3: Kanji mode
m
= Data size (1 to 15 bytes, set when selecting binary)
n
=Print data
2D50 2D Code. Specifies Data Matrix (ECC200) of 2D code.
a
= Cell width (01 to 16 dots)
b
= Cell height (01 to 16 dots)
c
= Quantity of cells per line (000 fixed)
d
= Quantity of lines (000 fixed)
m
= Data size (1 to 3116 bytes, set when selecting binary)
n
=Print data
Specify 7EH, 00H when printing 00H
Specify 7EH, 7EH when printing 7EH
T1 Register external character of 16x16 dots in memory card.
a = [Data type] =
H: Hex character
B: Binary code
b = [Registration font code address] =
<JIS>
H: “21” to “7F” Up to 95 registries
B: 21H to 7FH Up to 95 registries
<Shift JIS>
H: “40” to “9E” Up to 95 registries
B: 40H to 9EH Up to 95 registries
n = [External character data]
T2 Register external character of 24x24 dots in memory card.
a = [Data type] =
H: Hex character
B: Binary code
COMMAND QUICK REFERENCE
INSTRUCTION DESCRIPTION