Unit 3: Code Quick Reference
E/Pro Programming Reference
3-24 PN: 9001096E
_F Smart Label Start Specification. To show the start of small label print specification. Only
applicable to the M10e printer.
_Nab Format Specification. Specifies small label format. Only applicable to the M10e printer.
a
= Field number (01 to 99)
b
= Data digit (01 to 99)
_Qab Label Print Number Specification. Specifies the print number for small labels. Only
applicable to the M10e printer.
a
= Print number (0001 to 9999)
b
= 0: Auto new line
1-9: Quantity of blank labels
Vbbbb Vertical Position. Specifies a field’s vertical location down the length of the label from the
current base reference point. Units of measurement are dots.
WA (elements) Calendar Print. Prints the date and/or time field (up to 16 characters) from the printer’s
internal clock. Use slash to separate date elements and colon to separate time elements.
The calendar feature is a purchase option and will only be applicable to those printers so
ordered.
Elements = YY: 2 digit Year (00 to 99)
YYYY: 4 digit Year (1981 to 2080)
MM: Month (01 to 12)
DD: Day (01 to 31)
HH: 12 Hour (00 to 11)
hh: 24 Hour Clock (00 to 23)
mm: Minutes (00 to 59)
ss: Seconds (00 to 59)
TT: AM or PM
JJJ: Julian Date (000 to 366)
WW: Week (00 to 53)
ww: Week (01 to 54)
WBa Font Type. Specifies the 18W x 30L dot matrix font (includes descenders).
a = 0: Disables auto-smoothing of font
1: Enables auto-smoothing if expansion is greater than 3
WDHaaaaVbbbbXccccYddd
d
Copy Image Area (Partial Copy). To copy an image to another location of the label.
aaaa = Horizontal position of the top left corner of image area
bbbb = Vertical position of the top left corner of image area
cccc = Horizontal length of image area
dddd = Vertical length of image area
WIa IP Address setup. Specifies IP address setup method.
a = 0: Manual setup
1: DHCP
WKnn...n Job Name. Stores the job name.
nn..n = Job name, up to 16 ASCII characters
COMMAND QUICK REFERENCE
INSTRUCTION DESCRIPTION
To Next Page
Loading...
