Unit 4: Standard Command Codes
E/Pro Programming Reference
4-17 PN: 9001096E
FORM OVERLAY, RECALL
FUNCTION
To recall the label image from the form overlay memory for printing. Additional or different
data can be printed with the recalled image.
FORMAT
<ESC>/
Must be preceded by all other data and placed just before Print Quantity (<ESC>Q)
command.
EXAMPLE
<ESC>A
<ESC>H01000<ESC>V0125
<ESC>STHIS IS THE STORED IMAGE WITH A BARCODE
<ESC>H0100<ESC>V0165<ESC>B103100*12345*
<ESC>&<ESC>Z
<ESC>A<ESC>H0100<ESC>V0050
<ESC>STHIS IS RECALLING AND ADDING TO THE STORED IMAGE<ESC>/
<ESC>Q1
<ESC>Z
OUTPUT
(4-9)
NOTES
The overlay is stored using the Form Overlay Store (<ESC>&) command.
If this command is used with the Expanded Print Length (<ESC>EX0) command the Form Overlay
length cannot exceed 9999 dots.
To Next Page
Loading...
