Unit 4: Standard Command Codes
E/Pro Programming Reference
4-29 PN: 9001096E
SHEET SENDING SPECIFICATION
FUNCTION
Specifies paper delivery (feed operation) of marked unit (eye-mark, gap) for small label. Only
applicable to the M10e printer.
FORMAT
<ESC>RS
Place after <ESC>A but before <ESC>Z.
EXAMPLE
<ESC>A
<ESC>RS
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
Only used for single items.
The <ESC>RS command specifies the small label sheet sending of eye-mark unit at the printer driver
and cannot be combined with other standard commands.
To Next Page
Loading...
