SATO CL408 - Custom Protocol Command Codes; Download; RESET; DOWNLOAD PROCEDURE

Unit 4: Standard Command Codes
E/Pro Programming Reference
4-40 PN: 9001096E
FONT, RASTER
FUNCTION
To print point size characters created using font definitions.
FORMAT
<ESC>A<ESC>RDabb,ccc,ddd,nn. . .n
a=A:Times
B: CG Triumvirate
bb = 00: Always
ccc = Horizontal size (4 - 999 dots or P02 - P99)
ddd = Vertical size (4 - 999 dots or P02 - P99)
nn..n = Data to be printed.
Place within the normal command stream.
EXAMPLE
<ESC>A
<ESC>V0100<ESC>H0100
<ESC>RDA00,P28,P28,CG Times
<ESC>V0200<ESC>H0100
<ESC>RDB00,075,075,CG Triumvirate
<ESC>Q1
<ESC>Z
OUTPUT
(4-28)
NOTES
The “cccc” Horizontal Size and “dddd” Horizontal Size parameters can be entered either in dots or
points, but both parameters must use the same value types. If point size is used, the point size is
preceded by a “P”.
Refer to Appendix: Reference Table 8 for additional information.