SATO CL408 - Two-Dimensional Bar Codes; Maxicode

Unit 4: Standard Command Codes
E/Pro Programming Reference
4-43 PN: 9001096E
EXTERNAL CHARACTER RECALL TEXT FLOW
FUNCTION
Specifies recall print specifications of vertical and horizontal text flow of external character
registered in printer memory. Commands k1 and k2 are for vertical recall and K1 and K2 are
for horizontal.
FORMAT
<ESC>K1, K2, k1, or k2
a = External specification mode
H: HEX character specification
B: Binary code specification
I: With smoothing function (HEX code)
C: With smoothing function (binary code)
J: With highlighting function (HEX code)
D: With highlighting function (binary code)
K: With smoothing & highlighting function (HEX code)
E: With smoothing & highlighting function (binary code)
b = JIS registration code
H, I, J, K: 9021 to 907F
B, C, D, E: 9021H to 907FH
Shift JIS registration code
H, I, J, K: F040 to F09E
B, C, D, E: F to F09EH
Place after <ESC>V and <ESC>H but before <ESC>Z.
EXAMPLE
Example with 24 x 24 external callout specification, HEX code data of JIS
<ESC>A
<ESC>T1H21
00FF . . . . . . . . . . FF00
<ESC>Z
<ESC>A
<ESC>V100<ESC>H200<ESC>K1H9021
<ESC>Q2
<ESC>Z
Example with 16 x 16 external callout specification, binary code data of Shift JIS
<ESC>A
<ESC>T2B<ESC>40
00FF . . . . . . . . . . FF00
<ESC>Z
<ESC>A
<ESC>V100<ESC>H200<ESC>k2B<ESC>90<ESC>40
<ESC>Q2
<ESC>Z
OUTPUT
These commands do not result in visual printer output.
NOTES
Re-register if normal printing is not conducted.