SATO CL408 - SECTION 6. TROUBLESHOOTING; Initial Checklist; USING THE CENTRONICS (PARALLEL) INTERFACE

Programming Manual 2. Command Codes
SATO RISC Printers 107
Memory Card Function
Graphics, Custom Recall
Command Structure:
<ESC>GRaaa
aaa: Graphics storage number (001-999)
Example: <ESC>GR111
Placement: The Recall command is sent in a secondary data st-
ream to print the graphic, and follows any necessary
position or size commands.
Default: None
Function:
Use the Recall command any time you want to print a graphic image
on a label along with other printed data.
Input:
Non Rotated Graphic
<ESC>A<ESC>CC1
<ESC>V0100<ESC>H0080<ESC>L0505
<ESC>GR001
<ESC>Q1<ESC>Z
Graphic Rotated 90°
<ESC>A<ESC>CC1<ESC>%1
<ESC>V0180<ESC>H0250<ESC>L0505
<ESC>GR001
<ESC>Q1<ESC>Z
Graphic Rotated 180°
<ESC>A<ESC>CC1<ESC>%2
<ESC>V0180<ESC>H0500<ESC>L0505
<ESC>GR001
<ESC>Q1<ESC>Z
Graphic Rotated 270°
<ESC>A<ESC>CC1<ESC>%3
<ESC>V0100<ESC>H0700<ESC>L0505
<ESC>GR001
<ESC>Q1<ESC>Z