Programming Manual 3. Command Code Quick Reference
SATO RISC Printers 131
GIabbbcccdd
ee...e Store Custom Graphics. Stores a graphic image in
the memory card to be called later for printing on a
label.
a = Specifies format of data stream to follow
B Binary
H Hexadecimal
bbb = Number of horizontal 8 x 8 blocks (001-248)
ccc = Number of vertical 8 x 8 blocks
(001-267 for 7" label)
dd = Graphics storage number (01-99)
ee...e = Data to describe the graphic image
GRcc Recall Custom Graphics. Recalls for printing the gra-
phic image stored by the GI command.
cc = Storage number (01-99)
PIaa,bbbbb,
cc...c Store PCX Graphics File. Stores a PCX graphic file.
aa = Storage number (01-99)
bbbbb = Number of bytes in the file to be stored.
PYaa Recall PCX Graphics File. Recalls a PCX graphics
file.
aa = The storage number assigned to the file (01-99)
YR,aa
/D,bb,cc...c Recall Format/Field. To recall a field from a format
previously stored in the memory card.
aa = Number of format to be recalled (01 to 99)
bb = Number of field to be recalled (01-99)
cc...c = Data to be placed in field.
YS,aa
/Nbb,cc Store Format/Field.Tostoreafieldinaformatinthe
memory card.
aa = Format number
bb = Field number (01-99)
cc = Number of characters in the field
*abb Clear Card Memory. Clears individual memory and
buffer areas.
a = Memory section to be cleared
G SATO graphic files (01-99)
To Next Page
Loading...
