SATO CL408 - Matrix Two of Five

Programming Manual 4. Bar Code Specifications
SATO RISC Printers 141
Matrix Two of Five
Command Structure:
1:3 ratio: <ESC>B6bbccc (data)
2:5 ratio: <ESC>BD6bbccc (data)
1:2 ratio: <ESC>D6bbccc (data)
bb: Width of narrow element in dots (01-12)
ccc: Bar height in dots (001-600)
(data): Bar code data (numeric only); must be an even number
of digits or else the printer will add a leading zero.
Character Set:
0-9 (numeric only)
Input:
<ESC>H0100<ESC>V0775<ESC>BD60310012345
<ESC>H0230<ESC>V0885<ESC>XS12345
Output:
Note: To add horizontal guard bars to the top and bottom of the
bar code, use the Line and Box command.