SATO CL408 - Standard Operation

Programming Manual 5. Interface Specifications
SATO RISC Printers 181
dition and 0V when a false condition exists. The maximum voltage
that can be applied to these pins is +50V and the maximum current
they can sink is 500 milliamps.
STANDARD OPERATION
1Kohm,¼W
Pin 1
Vcc = +5V
Signal Out
Pin2,3,6,7or8
External Output Signal Types (Pin #6)
End PrintStart Print
20 milliseconds
+5V
0V
PRINT END
TYPE 4
+5V
0V
PRINT END
TYPE 3
+5V
0V
PRINT END
TYPE 2
+5V
0V
PRINT END
TYPE 1
+5V
0V
+5V
0V
PRINT START
INPUT
PRINT
REPEAT