SATO CL408 - SECTION 3. CLEANING AND MAINTENANCE; INTRODUCTION; PROCEDURES CL608 AND CL612; ADJUSTING THE PRINT QUALITY

24 SATO RISC Printers
2. Command Codes Programming Manual
<ESC>H0605<ESC>V0828<ESC>OB95260
<ESC>H0755<ESC>V0705<ESC>BF0314024
<ESC>H0770<ESC>V0675<ESC>OB24
<ESC>H0450<ESC>V0980<ESC>BG03100>GAB>B789>C123456
<ESC>H0560<ESC>V1085<ESC>XS AB789123456
<ESC>Q1<ESC>Z
Note: Carriage Returns and Line Feeds have been added to the
command listing for clarity and should not be included in
the actual data stream
Output: