SATO CL408 - Bar Codes, Expansion; Command Structure; Special Notes; Bar Codes, Variable Ratio

42 SATO RISC Printers
2. Command Codes Programming Manual
Copy Image Area
Command Structure:
<ESC>WDHaaaaVbbbbXccccYdddd
aaaa: Horizontal position of the top left corner of the area to
be copied
bbbb: Vertical position of the top left corner of the area to be
copied
cccc: Horizontal length of the image area to be copied
dddd: Vertical length of the image area to be copied
Example: <ESC>WDH0100V0050X0600Y0400
Placement: Anywhere within the data stream, after specifying the
location of the duplicate image.
Default: None
Function:
To copy an image from one location to another on the same label. This
may be useful for duplicating individual fields or entire sections of the
label with only one command.
Input:
<ESC>A
<ESC>H0050<ESC>V0050<ESC>E010<ESC>XM
M-8400RVM-8400RVM-8400RV
M-8400RVM-8400RVM-8400RV
M-8400RVM-8400RVM-8400RV
M-8400RVM-8400RVM-8400RV
<ESC>H0180<ESC>V0250<ESC>WDH0165V0050X0400Y0200
<ESC>Q1<ESC>Z
Output: