52 SATO RISC Printers
2. Command Codes Programming Manual
Form Overlay, Recall
Command Structure:
<ESC>/
Example: See above
Placement: Must be preceded by all other data and placed just be-
fore the Print Quantity command (<ESC>Q)
Default: None
Function:
To recall the label image from the form overlay memory for printing.
This command recalls a stored image from the overlay memory. Addi-
tional or different data can be printed with the recalled image.
Input:
<ESC>A
<ESC>H0001<ESC>V0125
<ESC>STHIS IS THE STORED IMAGE WITH A BARCODE
<ESC>H0001<ESC>V0165<ESC>B103100*12345*
<ESC>&<E SC>Z
<ESC>A<ESC>H0001<ESC>V0050
<ESC>STHIS IS RECALLING AND ADDING TO THE STORED
IMAGE<ESC>/
<ESC>Q1<ESC>Z
Output:
Note: The overlay is stored using the <ESC>& Form Overlay
Store command.
To Next Page
Loading...
