SATO CL408 - Fonts WB, WL, XB & XL; Command Structure; Special Notes

Programming Manual 2. Command Codes
SATO RISC Printers 55
C00003C00003 C00003C00003 C00003C00003
C00003C00003 C00001800003 C00000000003
C00000000003 FFFFFFFFFFFF FFFFFFFFFFFF
<ESC>H0300<ESC>V0100<ESC>XSPLEASE PLACE YOUR DISK
<ESC>H0300<ESC>V0150<ESC>XSIN A SAFE PLACE
<ESC>Q1<ESC>Z
Output:
Note:
1. Do not use ASCII <CR> or <LF> characters (carriage return or line
feed) as line delimiters within the graphic data or the actual image
will not be printed as specified.
2. A custom graphic can be enlarged by the <ESC>L Character
Expansion command.
3. Use an optional Memory Card to expand the print length.
4. To store graphic images in an optional memory card, see the
Memory Card Functions section.
5. The binary format reduces the transmission time by 50%.