SATO CL408 - Graphics, PCX; Command Structure; Printer Input; Special Notes

60 SATO RISC Printers
2. Command Codes Programming Manual
Note:
1. It is recommended that all lines and boxes be specified in the nor-
mal print direction.
2. The maximum allowable lengths are as follows:
CL 408 CL 412 CL 608 (VA) CL 612 (VA)
Horizontal
aaaa
0 to 0832 0 to 1248 0 to 1216 0 to 1984
Vertical
bbbb
0001 to 1424 0001 to 2136 0001 to 1424 0001 to 2136
M8485S M8490S M8460S M8459S
Horizontal
aaaa
0 to 1248 0 to 1344 0 to 1216 0 to 0896
Vertical
bbbb
0001 to 1424 0001 to 2136 0001 to 1424 0001 to 2136
XL 400 XL 410 M8400RV
Horizontal
aaaa
0 to 0800 0 to 1200 0 to 0832
Vertical
bbbb
0001 to 1920 0001 to 1920 0001 to 1920