SATO CL412e - Page 161

Page 9-7
Section 9. Optional Accessories
SATO CL408e/CL412e Service Manual
PN 9001078
Rev. A
RH COVER
LH COVER
FRONT DOOR
STEP PROCEDURE
1. Switch the printer OFF but keep the power cable plugged in to
discharge any possible static charges.
2. Raise the RH cover uncovering the mechanical section. Loosen (2)
inside screws holding the LH cover to the frame. Remove (2)
outside screws holding the LH cover to the base and remove the
cover. Swing the front door open. Figs. 9-10 & 9-11
FRONT DOOR
RH COVER
LH COVER
ACCESS PLATE
(TO BE REMOVED)
Label Dispenser Installation
Fig. 9-10