SATO CL412e - Sheet Unit Cut Quantity

Unit 4: Standard Command Codes
E/Pro Programming Reference
4-124 PN: 9001096E
SHEET UNIT CUT QUANTITY
FUNCTION
Specifies the sheet cut quantity for small labels. Only applicable to the M10e printer.
FORMAT
<ESC>RCaa
a = Sheet cut quantity (01 to 99)
Place before quantity command and <ESC>Z.
EXAMPLE
<ESC>A
<ESC>RI3200,1200,00,00,1600,0600,02,02
<ESC>A112003200
<ESC>RC01
<ESC>Z
OUTPUT
(4-63)
NOTES
Sheet is a certain range specified under <ESC>A1 when it is divided into small labels under <ESC>R1.
The command <ESC>RC specifies the sheet cut quantity of small labels at the printer driver and
cannot be combined with other standard commands.