Page 9-5
Section 9. Optional Accessories
SATO CL608e/CL612e Service Manual
PN 9001079
Rev. B
Label Cutter Kit Installation
DETACH SEN3 CONNECTOR
FROM PCB BOARD AND REPLACE
WITH CABLE CONNECTOR
MARKED “CUTS” FROM CUTTER
ATTACH CABLE CONNECTOR END
MARKED “CUTP” FROM CUTTER
TO CN2 ON POWER SUPPLY
Figs. 9-6
SECURE CUTTER WITH
SCREWS AT (5) PLACES
CUTTER
Figs. 9-7
To Next Page
Loading...
