SATO CL612e - Page 117

Page 6-11
Section 6. Replacement Procedures
SATO CL608e/CL612e Service Manual
PN 9001079
Rev. B
Replacing the Power Supply
REMOVE MOUNTING PLATE
(WITH PCB ATTACHED) AND
MOVE AWAY FROM THE
POWER SUPPLY
Fig. 6-11
REMOVE (2) SCREWS
(POWER SUPPLY)
LOWER THE
MEDIA HOLDER
Fig. 6-13
REMOVE BOTTOM
AND TOP SCREWS
Fig. 6-14
Fig. 6-12
POWER SUPPLY
DETACH CABLE
LIFT OUT POWER
SUPPLY
Fig. 6-15