SATO CL612e - Page 139

Page 6-33
Section 6. Replacement Procedures
SATO CL608e/CL612e Service Manual
PN 9001079
Rev. B
Replacing the Paper End Switch (Micro-Switch) and the
Bottom Half of the Notch/Gap and Eye-Mark Sensors
Fig. 6-62
BOTTOM HALF NOTCH/GAP
AND EYE-MARK SENSORS
Fig. 6-61
PAPER END SWITCH
REMOVE (2)
SCREWS
NOTCH/GAP
SENSOR
(BOTTOM
HALF)
REMOVE (2)
SCREWS
Fig. 6-63
PAPER END-SWITCH
(MICRO-SWITCH)