SATO CL612e - Flash Memory Expansion Installation

Page 9-20
Section 9. Optional Accessories
SATO CL608e/CL612e Service Manual
PN 9001079
Rev. B
Flash Memory Expansion Installation
Figs. 9-25
INDEXING NOTCH
NO NOTCH ON THIS SIDE
FLASH MEMORY MODULE
INSERT THE FLASH MEMORY
MODULE INTO THE MAIN PCB
MEMORY FRAME AT
APPROXIMATELY 45
0
. NOTE THE
INDEXING NOTCH ON THE
MODULE. GENTLY PUSH DOWN TO
SNAP INTO POSITION
INDEXING NOTCHES
APPROXIMATELY
45
0
ANGLE
REMOVE (3)
SCREWS
Fig. 9-23
RAISE THE ACCESS DOOR AND
LOOSEN (2) SCREWS ON THE INSIDE
TOP OF THE PRINTER