SATO GL408e - True Type Font, Recall

Unit 5: Optional Command Codes
SATO GL4xxe SBPL Programming Reference Page 5-10
TRUE TYPE FONT, RECALL
FUNCTION
Specifies to invoke True Type Font.
FORMAT
<ESC>BJRabbccddeeffffgg...g
<ESC>BJTa,aa,bb,cc,dd,ee,ffff,gg...g
a = Font ID (00 to 99)
b = Horizontal magnification (01 to 12)
c = Vertical Magnification (01 to 12)
d = Character Pitch (01 to 99)
e = Backup (00 fixed)
f = Print Character Quantity (0000 to 9999)
g=Data
Place anywhere between <ESC>A and <ESC>Z.
EXAMPLE
<ESC>A
<ESC>H0100<ESC>V0100<ESC>BJR1010101000010TEST
<ESC>Q1
<ESC>Z
OUTPUT
(5-3)
NOTES
This command is not valid without an optional memory card. Specify the Card Slot for
Use <CC> prior to using this command.