SATO GL408e - Data Matrix Code, Data

Unit 4: Standard Command Codes
SATO GL4xxe SBPL Programming Reference Page 4-46
DATA MATRIX CODE, DATA
FUNCTION
Specifies data for the data matrix code of 2D code.
FORMAT
<ESC>DC
n=Print data
Place after <ESC>BX.
EXAMPLE
<ESC>A
<ESC>H0100<ESC>V0100<ESC>BX011002020000000001
<ESC>DC1234567890
<ESC>Q1
<ESC>Z
OUTPUT
This command does not result in printer output. Refer to <ESC>DC for printer output.
NOTES
This code must be placed after the <ESC>BX command.