SATO LM412e - Page 23

English
Setting carbon ribbon
Use only SATO carbon ribbons.
Use of other than approved carbon ribbons may result in unsatisfactory print quality and/or
damage to the print head and may void your warranty.
‒
1
‒ Open the side cover.
‒
‒
‒
‒
‒
‒
‒
‒
2
Push up the purple head lock lever in
the direction of the arrow shown to
open the thermal head.
‒
‒
‒
‒
‒
‒
‒
3
‒ Place the carbon ribbon on
the ribbon supply spindle and
push the ribbon roll all the way
to the inside of the printer.
(Confirm winding direction)
‒
‒
‒
‒
‒
Side cover
Thermal head
Head lock
lever
Ribbon
supply spindle
Carbon ribbon
15
LM400eクイックガイド070806.inddE15
LM400eクイックガイド070806.inddE15
2007/08/0611:03:00
2007/08/0611:03:00