4 Operation and Configuration
159
S84-ex/S86-ex Operator Manual
HEAD CHECK MODE
Set the method for the head check.
• ALL: Perform the head check for every item.
• CHECK PAGE: Perform the head check for each specified number of
media.
• START-END: The head check occurs before starting to print and when
printing is stopped. If backfeed is applicable, the head check occurs
before starting to print, when stopping to print and during the backfeed.
Note
Shows only if the head check function is enabled.
HEAD CHECK PAGE NO.
Specify the number of media between each head check.
The setting range is from 000001 to 999999.
Note
Shows only if HEAD CHECK MODE is set to CHECK PAGE.
EXTERNAL SIGNAL SETTING
Select whether or not to perform the external signal setting.
• YES: Proceed to the external signal setting screen.
• NO: Proceed to the ZERO SLASH screen.
EXTERNAL SIGNAL
Enable or disable the external signal (EXT) function.
• ENABLE: Enable the external signal (EXT) function.
• DISABLE: Disable the external signal (EXT) function.
Note
Shows only if PRINTER TYPE is set to CONTINUOUS.
To Next Page
Loading...
