4 Operation and Configuration
175
S84-ex/S86-ex Operator Manual
HEX DUMP
Set the memory for saving the hex dump data.
The file name of the data to be saved is created from “DATA_001.DAT” in
sequence.
A maximum of one hundred hex dump data can be saved.
When saving file with one hundred files already in the media, the older file
starting from the first number (001) will be overwritten in sequence.
• SD: Save data to an SD card.
• USB: Save data to a USB memory.
Note
• For installation and removal of the memory, refer to Section 2.7
Installing Optional Memory Storage.
• Three beeps will sound if you press the ENTER button when the
selected memory is not installed.
ONLINE
This screen shows an online status icon if RECEIVE DATA is selected. HEX DUMP PRINT
HEX DUMP SAVE
OFFLINE
This screen shows an offline status icon if RECEIVE DATA or INTERNAL
DATA is selected.
To Next Page
Loading...
