SATO S84 ex - Page 373

9 Appendix
371
S84-ex/S86-ex Operator Manual
Print
Print Method Direct thermal and thermal transfer
Print Speed S84-ex 203 dpi: 4 to 16 inches/sec (101.6 to 406.4 mm/sec)
305 dpi: 4 to 14 inches/sec (101.6 to 335.6 mm/sec)
609 dpi: 2 to 6 inches/sec (50.8 to 152.4 mm/sec)
S86-ex 203 dpi: 4 to 14 inches/sec (101.6 to 335.6 mm/sec)
305 dpi: 4 to 12 inches/sec (101.6 to 304.8 mm/sec)
Resolution S84-ex: 203 dpi (8 dots/mm)
305 dpi (12 dots/mm)
609 dpi (24 dots/mm)
S86-ex: 203 dpi (8 dots/mm)
305 dpi (12 dots/mm)
Non-printable Area Pitch direction (Excludes liner)
Top: 1.5 mm (0.06”), Bottom: 1.5 mm (0.06”)
Width direction (Excludes liner)
Left: 1.5 mm (0.06”), Right: 1.5 mm (0.06”)
Printable Area S84-ex 203 dpi: Length 2500 mm (98.42”) x Width 104 mm (4.09”)
305 dpi: Length 1500 mm (59.05”) x Width 104 mm (4.09”)
609 dpi: Length 400 mm (15.75”) x Width 104 mm (4.09”)
S86-ex 203 dpi: Length 1249 mm (49.17”) x Width 167.5 mm (6.59”)
305 dpi: Length 1249 mm (49.17”) x Width 167.5 mm (6.59”)
Print Darkness Darkness level: 1 to 10
Sensors
I-mark
(Reflective Type)
Sensitivity: Adjustable
Gap
(Transmissive Type)
Position and sensitivity: Adjustable
Head Open Fixed
Top Cover Open Fixed
Media Sensor Assembly
Open
Fixed
Label End Sensor Detect with I-mark sensor
Ribbon End Sensor Fixed
Ribbon Supply Sensor Fixed